Victory Technology Machinery Limited

White water sieve machine Witt ® Whitewater sieve for solid-liquid separation. It uses high velocity, centrifugal filter to remove fine mesh sieve size larger than the pore size of particulates, without particle density. Main features: 1 after filtering water to meet reasonable standards spray water 2 closed-loop system to achieve energy savings, fiber recovery; reduce emissions; improve machine operating temperature increased production 3 is the maximum processing capacity of 15.14 m3/min 4 treated water from the normal fluctuations 5 not blocked design 6 high solids removal 7 Low maintenance works Firstly the water flows in depth of 3 to 4 meters. The water level reaches the inlet pipe through the central water distributor, and then sprayed through the nozzle tangentially to the inner surface of rotating screen, forming a series of overlapping film. Low centrifugal force generated by rotating screen enough to make Whitewater a high flow rate through the sieve while the closure fibers. Concentrate mesh closure along the inner wall of slipping. Continuous rotation of the centrifugal screen, high water pressure, rotation angle along the external screen flushing spray can help concentrate slip. Screen rotation angle of the spray along the external rinse several times per second, in addition to assisting concentrates slipped, but also as a high-pressure backwash water to clean each sieve. Witt ® Whitewater Whitewater sieve after treatment can replace water as backwash water. Mesh inlet nozzle spray speed and speed combine to closure of some of the particle size of less than sieve aperture. Although Witt ® Whitewater sieve does not specifically used to remove fines and fillers, but they still have some removal, therefore treated Whitewater for spray water nozzle will not clog.